What is the ip address to takes you to the Linksys router setup screen?

What is the ip address to takes you to the Linksys router setup screen?

Public Comments

1. try 192.168.1.1 thats for my linksys or try 192.168.0.1, just in case but thats for my dlink
2. 192.168.1.1
3. 192.168.1.1 no user id - password : admin
4. If it is a Vonage Router 192.168.15.1. otherwise like the others said 1.1 ---- JT
5. if you got ms dos and type ipconfig /all the defalt gateway is your routers address it will begin with 192.168.*.*, could be 0 or 1
6. The default IP address should be 192.168.1.1. Use that, unless you (or someone else) changed the address. If so, then use the new address that was assigned.
7. Concurs with all answers (that’s default) – however if also can be configured to use any other address starting from:192, 10 or 172. Should 192.168.1.1 don’t work: 1.Go to prompt command: “START” >> “RUN” >> type “CMD” 2.In new black window type: ipconfig /all 3.Address listed as Default Gatway is your routers private IP PS. Default credentials for authentication are: username: blank password: “admin”, depending however on ISP you are using could be anything else (typical: credentials given by ISP used for connecting to Internet)